Industrial and agricultural and ATV tires are important bargaining chips for vehicle operation. Only by ensuring the overall nature can personal safety be guaranteed. It is precisely because of this that once there is a problem with industrial, agricultural and ATV tires, it must be solved in time to avoid because of Industry and agriculture and the village of ATV tires are bad, which threatens human life.
For industrial and agricultural and ATV tires, there are often some problems in the process of use, and these problems are also caused by the damage caused by daily driving. Generally, there are the following points:
1. Industrial, agricultural and ATV tires are severely worn
In industrial, agricultural and ATV tires, the wear mark is generally located in the tire drainage groove and is a rubber protrusion with a trapezoidal cross-section. When the industrial, agricultural and ATV tire tread is worn flush with the wear mark, the tire should be replaced.
2. Industrial and agricultural and ATV tires are seriously aging
The tread and sidewall of industrial, agricultural and ATV tires generally have cracks and other phenomena. Even if the tire is only used for one year, it also needs to be replaced. Even if the tire wear is not obvious, it should be replaced after more than 5 years of use.
3. Bulge deformation of industrial and agricultural and ATV tires
Bulges appear in industrial, agricultural and ATV tires, indicating that the inner metal coil has been deformed or broken, and must be replaced in time.
4. There are obvious scratches on the surface of industrial and agricultural and ATV tires
Industrial and agricultural and ATV tire treads are punctured or punctured by other objects. The hole diameter is less than 6mm and can be repaired, and if it is larger than 6mm, it must be replaced.