After a long period of use, industrial and agricultural and ATV tires will inevitably have some problems of one kind or another, and wear and tear is inevitable. Daily care needs to be done even more.

  So in general, what are the characteristics of industrial and agricultural and ATV tire tread failures? And how should these phenomena be adjusted?

  1. Unilateral wear. "Commonly known as eccentric wear", the phenomenon is mainly due to the excessive camber or inclination of the wheels, which is often caused by poor wheel alignment. It is recommended to correct mechanical defects and maintain standard air pressure. If necessary, replace the front and rear axle tires regularly. It should be noted that radial tires and bias tires cannot be mixed on the same axis due to intermodulation.

  2. Diagnosis of local wear caused by braking. Correct the braking system if necessary. Drivers are advised to avoid sudden braking when driving.

  3. Diagnosis of the tread rubber block being cut off. When driving on the road, sharp foreign objects on the road surface, including debris, may chip away the tread rubber and may damage the wire girdle or the carcass ply. It is recommended to avoid foreign objects and debris while driving on the road.