Maintenance items for industrial and agricultural tires and ATV
05.20.2021

  1. Industrial and agricultural tires and ATVs are worn to the point of wear and must be replaced.

  2. There is a one-to-one correspondence between load and air pressure. Excessive load is similar to low air pressure, which will cause damage to industrial and agricultural tires and ATVs. It is often used under overload, and the service life of the tire will be reduced by 20%-50 %; The same wrong loading method will also cause uneven tire load, which will affect the life expectancy of a single overload.

  3. The industrial and agricultural tires and ATVs on the vehicle must be properly transpositioned (adhere to the inspection during the first-level maintenance and the second-level maintenance of the vehicle), and the tires must be uniformly worn and extended to extend the service life; the application with a slightly larger outer diameter Installed on the outer wheel.

  4. Do not use refurbished industrial and agricultural tires and ATVs on the front wheels; try to use vertical stripes on the front wheels, and use horizontal stripes on the rear wheels.

  5. Adhere to the distance between cars when traveling at high speed, avoid unnecessary or frequent braking (brake), and reduce damage to the tires. At the same time, pay attention to the depth of the tire markings for your own safety considerations. The tires that are close to the flattened tires are less resistant to the road surface. , The braking distance is long, don't trek at high speed.

  6. Air pressure is the life of industrial and agricultural tires and ATVs. The inflation pressure must meet the air pressure specified by the national standard for different types and specifications. Always check the air pressure. Excessive or lack of air pressure will cause abnormal wear, cracks on the bottom of the ditch, and Damages such as broken cords and delamination of the cord.