Due to long contact with the ground, the tiresare inevitable that there will be a variety of friction problems, and when the friction accumulated to a certain extent, there will inevitably be problems, such as some cracks.

  Once there are tires problems, it is necessary to repair and replace in time, to ensure the quality of tires and thebasic driving.So for industrial and agricultural tires and ATV tires, when repairing and replacing the installation, what problems need to be noticed?

  Repair of industrial and agricultural tires and ATV:

  1.In summer,the tread wear to only 1.6 mm trench deep of industrial and agricultural tires and ATV can not be repaired.

  2.In winter, the tread wear to only 4 mm trench deep industrial and agricultural tires and ATV can not be repaired.

  3.Nail hole diameter is less than 6 mm can be repaired.

  4.Industrial and agricultural tires and ATV sidewall can not be repaired.

  Installation of industrial and agricultural tires and ATV:

  1.Before installing the tire, carefully check whether the rim is deformed, rusty, poor sealing, etc., to ensure that it is intact.

  2.The correct use of lubricant in the operation process.Remove the original balance block from the rim before installing the tire, and balance it again after installing the tire.