Yes,industrial tyres need regular inspection and maintenance. Regular inspection and maintenance of industrial tyres can ensure their normal operation, increase their service life and reduce the risk of accidents.

The specific requirements for inspecting and maintaining industrial tyres may vary depending on the application scenario and tyre type. But in general, the following are some common inspection and maintenance items:

1.Check the tyre pressure: Maintaining the proper tyre pressure is the key to ensure the normal operation of the tyre. Check your tyres' air pressure regularly and make sure it meets the tyre manufacturer's recommended values.

2.Check the tyre wear: check the tyre pattern depth, if the pattern depth is insufficient, it may affect the tyre grip and drainage performance. Driving on heavily worn tyres can cause the vehicle to lose control, so tyres need to be replaced regularly.

3.Check the appearance of the tyre: check whether the tyre has cracks, damage or abnormal wear. These can indicate an underlying problem with the tyre that needs to be repaired or replaced.

4. Clean the tyres regularly: remove dirt and debris on the tyres to maintain their good appearance and performance.

5.Inflation and tyre repair: If the tyre is found to be flat or punctured, it needs to be inflated or repaired in time. During prolonged parking or storage, it is also necessary to keep the tyres properly inflated to prevent tyre deformation or damage.

6.Hub and bearing inspection: check whether the hub and bearing are in normal operation, whether there are signs of loosening or damage.

In short, regular inspection and maintenance of industrial tyres is an important measure to ensure their normal operation and extend their service life. In the process of use, attention should also be paid to avoid overload and excessive use of tyres to reduce tyre wear and damage.