A variety of factors can cause damage or increased wear on industrial tires, the following are some of the main factors:1. Manufacturing reasons Material issues: The choice of tire material and manufacturing quality directly affect its durability. If there are impurities in the material, oil, or solvents that are not fully volatilized during the manufacturing process, it may lead to problems in the use of the tire.

There is no fixed standard for the replacement cycle of industrial tires, because it is affected by a variety of factors, including tire type, working environment, frequency of use, and maintenance status. However, based on some common experiences and guidelines, we can make a rough estimate of the replacement cycle of industrial tires.

The selection of agricultural tires requires attention to several details to ensure that tires can adapt to different operating environments, load carrying capacity and durability. Here are some key selection elements:

To determine whether agricultural tires need to be replaced, you can consider the following aspects:Observe the wear limit mark: there is a wear limit mark at the tread groove of each tire, and the thickness of this mark is about 1.6mm (also said to be 2mm).

When installing industrial tires, pay attention to the following matters:Before installation, first check the compatibility of the tire and the rim. Make sure that the tire specifications and models to be installed match the rim models, and the rim width must also be adapted to the tire.

To extend the service life of industrial tires, you can start from the following aspects:Choose the right tire model according to the vehicle's load, working environment and usage requirements to ensure that the tire has sufficient load-bearing capacity and wear resistance.

High-strength agricultural tires are designed and manufactured to meet the needs of high strength, high load and complex working environment in modern agricultural mechanization operations. It can withstand large loads, adapt to various complex road conditions and working environments, and provide stable and efficient operation support for agricultural machinery.

To reduce abnormal wear of industrial tires, the following measures can be taken and explained in combination with relevant figures and information:

There is a close relationship between the model and load-bearing capacity of industrial tires, which is specifically reflected in the following aspects:The specifications of industrial tires are often represented by a set of numbers, the first number represents the tire section width, and the second number usually represents the rim diameter (in inches).

How to Improve the Quality of Industrial Tyres?